Say Goodbye to Chemical Pickling & Mechanical Grinding, Cut Costs by 30% with Eco-Friendly Cleaning

6kW Ultra-High Power Laser Cleaning Machine

Efficient, Non-Destructive, Eco-Friendly – The Ultimate Solution for Heavy Industry Cleaning Pain Points

Pain Point Analysis Section

The Limitations of Low-Power Laser Cleaning Machines

In heavy industries such as shipbuilding, petrochemicals, rail transit, and mold casting, traditional low-power (3kW/2kW) laser cleaning machines often fall short:

• Low efficiency for thick rust/paint layers: For rust layers over 0.5mm on ship steel plates or large molds, repeated scanning is required, consuming excessive time and failing to meet batch production needs.
• Incomplete cleaning of complex curved surfaces: It is difficult to remove stubborn stains in grooves and welds of special-shaped engineering machinery parts due to insufficient laser penetration.
• High risk of damaging equipment when cleaning high-reflective materials: Cleaning aluminum, copper and other high-reflective metals may cause backlight to damage the laser, leading to high equipment failure rates.
• Poor stability during continuous operation: Inadequate heat dissipation leads to rapid power attenuation during long-term high-intensity cleaning, affecting cleaning consistency.

Our 6kW ultra-high power laser cleaning machine is specifically designed to solve these industry pain points.

Advantages 1: Free Parameter Comparison Chart

To address cleaning challenges across different industrial scenarios, we have compiled the 6kW Laser Cleaning Machine Adaptation Parameter Comparison Chart, covering the optimal combinations of power, scanning speed of major scenarios including ship rust removal, mold degumming and petrochemical pipeline descaling.

Fill in the form below (only company name + industry + position + email required) to get it for free, and receive the bonus High-Power Laser Cleaning Machine Operation Pitfall Guide to avoid workpiece damage caused by improper parameter settings.

Contact Us Now

Core Advantages Section

1. Industry-Leading Power, 125% Efficiency Improvement

• 6kW ultra-high output power can remove rust and paint layers within 0.8mm in one pass. Compared with 3kW equipment, the cleaning time of a single steel plate is reduced from 5 minutes to 2 minutes 13 seconds, with efficiency increased by 125%.
• Supports 24/7 continuous high-intensity operation with dual water-cooling heat dissipation system, power attenuation rate < 3%, meeting the batch production needs of heavy industry.

2. Non-Destructive Cleaning, Precise Protection of Workpiece Substrates

• Adopts pulsed laser technology with strong energy controllability. The cleaning process involves no mechanical contact, no grinding and no thermal deformation, without damaging the surface precision of workpieces.
• Suitable for scenarios with strict surface quality requirements such as precision molds, aerospace parts and high-speed rail tracks. After cleaning, it can directly enter the next process without secondary grinding.

3. Full-Scenario Adaptation, Overcoming High-Difficulty Cleaning Challenges

• Suitable for cleaning various metal materials such as carbon steel, stainless steel, aluminum and copper, as well as non-metallic surfaces such as concrete and stone.
• Equipped with handheld + automated robotic arm: The handheld probe flexibly handles local cleaning of special-shaped workpieces and large equipment; the automated workbench is suitable for batch cleaning of standardized parts, achieving multi-purpose with one machine.

4. Eco-Friendly Zero Emission, Meeting Global Strict Environmental Standards

• Only solid wastes such as rust residue and paint residue are generated during cleaning, without wastewater, waste gas or chemical agent residues, eliminating the need for additional environmental sewage treatment.
• No noise pollution, friendly working environment, helping enterprises pass environmental acceptance and avoid policy risks.

Advantages 2: Free Sample Cleaning Test

Theoretical parameters are not as good as actual test results! We offer free sample cleaning test service:

1. You only need to mail the workpiece to be cleaned (no limit on material and stain type, weight ≤ 2kg).
2. We will complete the cleaning test within 3 working days, record high-definition comparison videos (before-during-after cleaning), and provide a substrate non-destructive testing report issued by a third-party testing organization.
3. After the test, our technical engineers will interpret the test results one-on-one and match the optimal cleaning plan.

Click Contact Us, fill in the sample information, and lock your test quota (only 20 free quotas per month).

Contact Us Book Free Sample Test Now

Case Study Section

Case 1: Shipbuilding Industry – Hull Steel Plate Rust Removal

Customer Pain Points: A shipyard traditionally used sandblasting for rust removal, which was inefficient and caused severe dust pollution. Moreover, the steel plates were prone to secondary rusting after sandblasting.

Solution: Adopted the handheld mode of 6kW laser cleaning machine, with a cleaning speed of 22.5m²/h. After cleaning, the surface roughness Ra of the steel plate was ≤ 40μm, meeting the pre-coating treatment standard.

Customer Benefits: Labor costs reduced by 40%, environmental costs reduced by 50%, the adhesion of steel plate coating increased by 30%, and the service life of the coating extended by 2 years.

Case 2: Petrochemical Industry – Descaling & Rust Removal of Pipeline Outer Walls

Customer Pain Points: The oil pipeline of a petrochemical enterprise was corroded by oil stains and rust for a long time. Traditional high-pressure water cleaning was easy to cause corrosion of the pipeline inner wall, with high wastewater treatment costs.

Solution: Adopted the long-distance operation of 6kW laser cleaning machine to remove the 0.6mm-thick rust scale on the pipeline outer wall without disassembling the pipeline and affecting the normal operation of the pipeline.

Customer Benefits: Cleaning efficiency increased by 3 times, no need to stop production for operation, saving over 1 million yuan in annual maintenance costs.

Advantages 3: Free One-on-One Technical Solution

Is your enterprise facing challenges such as low cleaning efficiency, high environmental costs and workpiece damage?

We provide free one-on-one technical solution docking service:

• Our engineers with over 10 years of laser application experience will customize a personalized cleaning plan (including equipment configuration, site layout, cost accounting and payback period calculation) according to your production line scale, cleaning needs and workpiece materials.
• On-site demonstration is supported – we will bring the equipment to your factory for on-site cleaning test to visually show the cleaning effect.
• After signing the cooperation, free operation training + 1-year warranty + lifelong technical support will be provided.

Scan the QR code to add our technical consultant on WhatsApp, note [6kW Cleaner + Industry], and prioritize booking one-on-one solution docking.

Equipment Parameters & After-Sales Support Section

Model	Laser Power	Wavelength	Scanning Speed	Working Mode	Cooling Method
RN-HC6000	6kW	1080nm	0-30000mm/s	Handheld / Automated	Dual Water-Cooling

After-Sales Guarantee

• 1-year warranty for the whole machine, 2-year warranty for core components (laser).
• 7×24-hour remote technical support, after-sales needs responded within 12 hours, engineers arranged for on-line service within 24 hours (covering major industrial countries worldwide).
• Free operation training until proficiency; equipment maintenance manual provided, with regular maintenance reminders.

Product Link