Tired of chipped edges, low yields, or poor results with ultra-thin or reinforced glass?
Our next-generation Picosecond Laser Glass Cutting Machine is engineered to overcome the limitations of traditional mechanical and thermal cutting—delivering unmatched precision, efficiency, and yield.
The Problem: Traditional Glass Cutting Can’t Keep Up
Mechanical cutting and standard laser methods fall short in today’s advanced manufacturing:
- Edge chipping and micro-cracks
- Low success rates with chemically strengthened or ultra-thin glass
- Inability to process complex shapes with micron-level precision
These issues mean high scrap rates, slow output, and rising costs—especially in consumer electronics, automotive displays, foldable screens, and microfluidic chips.
Comparison Table: Picosecond Laser vs. Traditional Cutting Methods
| Key Metric | Traditional Mechanical / CO₂ Laser Cutting | Picosecond + CO₂ Hybrid Cutting |
|---|---|---|
| Edge Quality | Chipping, rough edges, visible cracks | Mirror-finish edge, no micro-cracks |
| Cut Width | ~200μm | As low as 15μm |
| Glass Strength Post-Cut | Significantly weakened | Edge strength 3x higher |
| Reinforced Glass Yield Rate | <70% | >98% |
| Ultra-Thin Glass Breakage | >30% break rate | <1% break rate |
| R-Shape / Complex Contour Cuts | Limited capability | ±0.01mm precision on curves and details |
| Tool Wear & Maintenance | High – frequent blade/tool replacement | None – non-contact laser, no consumables |
| Post-Processing | Required (grinding, polishing) | None needed |
| Automation Support | Minimal | Full auto loading/unloading + vision system |
| Processing Speed | Slower (CNC level) | Up to 500mm/s with dual-station setup |
| Environmental Impact | Debris, coolant waste | Cleanroom-friendly, no dust or liquids |
The Solution: Hybrid Picosecond + CO₂ Laser Cutting Technology
Our system combines ultrafast picosecond laser “cold cutting” with CO₂ thermal stress-assisted separation. This patented dual-laser approach ensures:
- Zero thermal damage during material modification
- Controlled, clean breakage along the modified line
- High-precision edge quality with minimal roughness (<0.5μm)
How does it work?
- Picosecond Laser delivers ultrashort pulses (<10ps) that modify the glass structure with no heat-affected zone.
- CO₂ Laser applies localized heating, inducing controlled thermal stress that cleanly splits the glass along the modified path.
This synergy delivers mirror-like edges, no taper, and perfect verticality—even on tough materials like Gorilla Glass or sapphire.
Core Advantages: What Sets Our System Apart
✅ Precision You Can Measure
- Spot size <2μm
- Cutting accuracy ≤20μm
- Vertical edge >89.5°, no post-grinding needed
- R-angle and contour cutting with ±0.01mm tolerance
✅ Higher Yield, Lower Waste
- Strengthened glass good yield rate >98%
- Scrap rate <0.5%
- No tool wear, drastically reduced maintenance
✅ Ultra-Thin & Specialty Glass, Handled with Ease
- Clean cutting on 0.03mm ultra-thin glass
- Seamless processing of curved, coated, or laminated glass
- Ideal for UTG (ultra-thin glass), AR waveguides, microchannels
✅ Efficiency That Pays Off
- Up to 3500 smartphone covers per day
- Dual-station design enables simultaneous cutting and loading/unloading
- CO₂ thermal separation is 5x faster than mechanical breaking
Smart Manufacturing, Built-In
- AI Vision System: Automatic mark recognition and precision alignment (±5μm)
- Real-time laser optimization: Adaptive control of energy based on material feedback
- One-click recipe switching: Easily switch between product types with saved settings
Applications Across Industries
Looking for foldable screen glass cutting, reinforced glass edge processing, or precision micro-hole laser drilling?
This system is built for:
- Smartphone glass panels & under-display sensors
- Automotive dashboards & curved display glass
- AR/MR optical waveguides
- Medical microfluidic chips
- High-end architectural and optical glass components
Why Our Customers Choose This Machine
🔹 Reduced defect rates boost productivity
🔹 Cleanroom compatibility with no dust or debris
🔹 Plug-and-play automation cuts setup time and operator error
🔹 Future-ready design supports AI and multi-focus upgrades
Ready to Upgrade Your Glass Processing Line?
If you’re looking for:
- Higher precision without trade-offs
- Faster processing with cleaner results
- Compatibility with tough, thin, or irregular glass
Then our Picosecond Laser Glass Cutting Machine is the solution you’ve been searching for.
📩 Contact Us for a Demo or Quotation
Let us show you how this system can transform your production. Our team of specialists is ready to help you choose the right configuration for your needs.
